YYT Docs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== GMSL to HDMI: Camera Direct Display ======

YYTECH's GMSL2HDMI Converter displays images from GMSL cameras on HDMI interface monitors, achieving "instant video output."

===== Block diagram =====
{{ :视频录制与回放产品:gmsl2hdmi_cam2display:gmsl2hdmi-direct.png?600 |原理框图}}

===== Appearance and Description =====
{{ :视频录制与回放产品:gmsl2hdmi_cam2display:gmsl2hdmi-camera.png?600 |GMSL相机直出HDMI显示}}

===== Steps for Use =====
  * Connect the GMSL camera to the GMSL input port's Fakra terminal. Link-A and Link-B can be connected arbitrarily unless otherwise specified.
  * Confirm that the camera model matches the one ordered. Generally, a single firmware version supports only one specific camera model (or compatible models).
  * Use an HDMI cable to connect the display to the module's HDMI output. Please use a reliable quality cable.
  * (Optional: Connect the GMSL2L output to another ECU to provide camera images.)
  * Connect the 12V power supply.
  * Observe the status of the HDMI display and the panel LED indicator.




===== Precautions =====
  *  Do not perform operations while powered on.
  *  The POC supply voltage for GMSL is 12V. Please confirm that it matches the camera's power supply voltage.
  *  If the indicator light is normal but there is no display on the HDMI, try updating the HDMI cable or using a different monitor.
  *  Use the included power supply. When using other power supplies, please ensure that the interface (plug) matches.
  *  The maximum display resolution on HDMI is 1080p60Hz. Images from cameras with higher resolutions will be scaled down for display.

===== Technical Support  =====
contact us: [[en:技术支持|Technical Support]]